The 3.5L (3498 cc) VQ35DE is used in many modern Nissan vehicles, but the most popular US chassis for engine upgrades are the Nissan 350z and the Infiniti G35. Unlike the inline six cylinders (RB26, 2JZ), the VQ35DE is a V6 configuration. It adds variable valve timing and has a stock bore of 95.5 mm and stroke of 81.4 mm. Output ranges from 240 hp to 301 hp (179 to 225 kW) and 246 ft•lbf to 287 ft•lbf (334 to 390 Nm). The VQ35DE is built in Iwaki, Japan and Decherd, TN. It was on the Ward's 10 Best Engines list for 2002 through 2006, the only engine to be on Ward's list every year since it's inception. The VQ35DE has an aluminum engine block and aluminum DOHC cylinder heads. It uses SFI fuel injection, has 4 valves per cylinder with VVT and features Nissan's nylon intake manifold technology. A modified version of the VQ35DE, called the S1 is produced by Nismo for the Fairlady Z S-Tune GT. It produces 300 ps or 285 hp (220 kW) at 7200 rpm, a higher rev-limit than that of the original VQ35DE.

BC high performance camshafts are ground on state-of-the-art CNC cam grinders to insure accuracy and tolerances to within .02mm. Every BC camshaft profile has been prototyped and dyno tested for proven horsepower results prior to placed into mass production. By grinding cores in high volume, Brian Crower, Inc. is able to pass the cost savings on to the end user. Quality at an affordable price.

BC uses small diameter grinding wheels during the finishing phase when applicable to generate a more aggressive ramp rate for a faster cylinder fill rate. More air + more fuel = more power. Although it takes longer to grind the cams, research and development has proven that the inverted radius created by the small grinding wheel on the opening side delivers more horsepower on radius and roller rocker applications than the conventional, large diameter grinding wheels.

All BC cams are checked on a high speed, sub-micron accuracy measuring gauge. The Adcole Camshaft Measuring System uses individual measuring heads for each cam journal and cam lobe, with .01 micron resolution, taking one datum point each 1/10th of a degree or 3,600 data points per revolution. Measuring camshafts for rise error and chattermark detection, this model can measure 200 parts per hour.

1. Returns; Defective and Damaged Merchandise

Defective and freight damaged merchandise (but only where G35Anything is providing shipment) may be returned to G35Anything for full credit, but only upon verification by G35Anything of such defect or damage. A Returned Merchandise Authorization ("RMA") form must be filled out by the Buyer and Approved by G35Anything. Credit will be issued to Buyer upon receipt of the RMA form and the claim approval from the freight company.

2. Returns; Exchanges; Good Merchandise

Returns of good merchandise may be accepted by G35Anything in its sole discretion under the following conditions:

 1. Return/Exchange of merchandise in totally re-saleable condition, without markings on the original packaging will be restricted to extraordinary circumstances with prior approval from. Accepted return will be assessed a 25% restocking charge. Returned part number shall not exceed 15% of total annual purchase quantities.

2. Return/Exchange of merchandise in packaging that has been marked, relabeled or otherwise defaced will be restricted to extraordinary circumstances with prior approval from your. Accepted return will be assessed a 30% restocking charge, except that G35Anything merchandise returned in packaging that has been marked, relabeled or otherwise defaced will be subject to a 40% restocking charge. Returned part number shall not exceed 15% of total annual purchase quantities.

3. Merchandise classified by G35Anything as TB (To Be Discontinued), or DC (Discontinued), may not be returned for credit.

4. Merchandise on sales promotion or inventory packages may not be returned for credit.

5. Buyer must pay all return transportation charges.

6. Buyer must obtain and complete an RMA form, issued by, for any good merchandise return or exchanges.

7. Returns/Exchanges will not be accepted under any circumstances after 15 calendar days after the ship dateindicated by G35Anything.

8. Any returns for non-fitment or quality issues will require high quality digital pictures of the products to be     emailed to the account manager before an RMA is approved.

9. Order cancellations will take up to 48 hours after a cancellation is requested before the order is officially cancelled and money processed.