STILLEN Introduces the All New Generation 3 Ultra Long Tube Intake for the G37 intake

A cold air intake is a system used to bring down the temperature of the air going into a car for the purpose of increasing the power of the internal-combustion engine. A secondary goal is to increase the appeal of a car by changing the appearance of a car's engine bay and creating an enticing intake noise. These aftermarket parts come in many different colors and many different sizes, and are an inexpensive way to increase the G37 intake performance.

">http://img3.imageshack.us/img3/2287/articleimage.jpg]

">http://img9.imageshack.us/img9/534/stilleng37intakehi.jpg]

• ·      ·        A dyno-proven 18.5 horsepower gain at the wheels on the G37 Coupe.  
• ·      ·        Estimated 22 horsepower gain at the flywheel on the G37 Coupe

For G37 Sedan owners, gains are 14 horsepower at the wheels. No other intake for the G37 can match these power gains. The new Gen 3 Ultra Long Tube Intake places two large K&N filters in front of the radiator and directly behind the main grille. Deliberate placement of the filters allow for optimum cold air flow and easy filter removal for cleaning.  It features additional polished tubes that pass through the front core support, larger air filters than the Generation 2 unit, a urethane splash guard to help protect the filter and a system of varied diameter tubing and steps to maximize air velocity.g37 g37 Our continuing dedication to getting the maximum performance from each vehicle has lead to the introduction of our new Generation 3 Ultra Long Tube Intake.  This intake has a radically new design that provides dramatically better power than any G37 intake on the market.  Our R&D team went through over 50 variations before being satisfied that this system is the best that can be made for the G37 Coupe and  g37 Sedan.intake. Recommended installation requires removal of the front fascia clip (not absolutely necessary, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support.  Installation time is estimated at two hours for an experienced technician.  No other part relocation or parts removal is required.  

Featured Product

Dual Intake by Stillen for G37 G35 350Z 370Z Stillen G37 Intake by Stillen Performance for the dual throttle body VQ engines intake. A cold air intake is a system used to bring down the temperature of the air going into a car for the purpose of increasing the power of the internal-combustion engine. A secondary goal is to increase the appeal o